Showing posts with label electric heat. Show all posts
Showing posts with label electric heat. Show all posts

Kapton (Polyimide) Etched Foil Heating Elements

Kapton (Polyimide) Etched Foil Heating Element
Kapton (Polyimide) Etched Foil Heating Element.
According to Wikipedia, "Polyimides have been in mass production since 1955. With their high heat-resistance, polyimides enjoy diverse applications in roles demanding rugged organic materials, e.g. high temperature fuel cells, displays, and various military roles. A classic polyimide is Kapton ..."

Kapton etched foil heating assemblies are constructed from a very thin etched foil circuit embedded between two layers of Kapton, or one layer of Kapton and some other material (such as alumina.) The result is a heater with features perfect for a wide variety of industries - from aerospace, to medical and scientific equipment, to research & development applications. 

Kapton heaters provide excellent heat transfer to adjoining surfaces with the release of minimal contaminants through the use of this very low mass, low outgassing, high dielectric material.  They provide very even heat distribution extremely fast heat-up and cool-down rates. Additionally, they can be constructed in just about any shape, size, wattage or voltage. They are also ideal for applications where distributed wattage (heating profile) is required. 

Furthermore, when the heater and ceramic insulator is bound in such a way to meet NASA’s low outgassing specification, Kapton heater assemblies are ideal for use in vacuum applications.

For more information, visit http://heater.belilove.com. Also, take a fast look at the video below.

Industrial Process Temperature Sensor Comparison

industrial thermocouples
Array of thermoucouple assemblies
Courtesy Durex
It's always useful to have quick references for things. Durex, a globally recognized manufacturer of electric heating solutions, published the Temperature Sensor Element Selection Guide included below in a recent blog posting. It provides a consolidated comparison of the four primary temperature sensing devices used for industrial process control. Many will find it useful, so we share it with you here.

All the technical expertise needed for your process heating challenges is readily accessible at BCE. Share your heating challenges with experts, combining your process and application knowledge with their expertise to develop effective solutions.


Flanged and Screw Plug Electric Heating Assemblies for Industrial Applications

flanged tubular electric heater assembly
Flanged Tubular Electric Heater Assembly
Hotwatt
Electric heating, though not the most energy efficient means of delivering heat, provides some distinct advantages as a means of controlling the temperature or thermal component of fluids and solids throughout commercial and industrial settings.

Tubular elements are a common form of electric heater. Essentially a metal tube with resistance wire and electrical insulation inside, tubular elements can be configured into almost uncountable shapes and sizes. Manufacturers typically offer a range of standard sizes and ratings, but that should never deter you from making contact to discuss your ideas for a custom arrangement.

Two mounting schemes that are readily used on tanks or other vessels are the screw plug and flanged heater assemblies. In each case, tubular heaters are bent in a "U" shape and fitted into either a pipe flange or a threaded plug. A junction box encloses the electrical terminations for the heating elements, providing a single ended assembly that can be easily mounted to an industrial standard mechanical connection. These assemblies are useful for tank or vessel OEMs that wish to provide a fluid heating option to their customers.
tubular electric heaters screw plug mounting
Examples of Screw Plug Electric Heaters
Hotwatt

Electric heat enables a properly configured controller to proportion heat into a subject fluid across a wide range, from very small packets that could be fractional percentages of full capacity to the fully available output of the heater. The units are compact, rugged, and can be configured to accommodate a broad array of industrial environments and applications.

Selecting or specifying a unit is uncomplicated. Determine the amount of heating capacity needed, then select the assembly mounting type (flange, screw plug, or other). Select an element sheath material that is compatible with the process media and a termination enclosure that suits the surrounding environment. Application assistance is available from product specialists who are well versed in the available options and can help you specify an assembly that provides excellent performance and an extended service life.

Electric Heaters 101: Get the Heat Out of the Heater

cartridge heater
Internal view of swaged cartridge heater.
Metal-clad electric heating elements share one very common and very important requirement for optimal performance - get the heat away from the resistance wire and into the work as efficiently as possible.

At the heart of most resistance type electric heaters is a nichrome alloy wire, or ribbon, referred to as the heating "element". It acts as a resistor to the electrical current and gives off heat. With sheathed heaters, the heating element is then wrapped in some sort of electric insulating material such as mica or magnesium oxide (MgO), and then encased in a metallic sheath. Unfortunately, both the electric insulator and the metallic sheath act as heat insulators to some degree, which cause the nichrome wire to get very hot. Nichrome wire has a melting point of 1400 deg. C (about 2500 degrees F). While this sounds high, the wires and ribbons can easily exceed these temperatures in normal operation when not allowed to adequately conduct heat.

Very often electric heater failure can be directly attributed to poor conductivity between the heating element and the process medium. Whether it be a cartridge, strip, band, duct or immersion heater the principle is the same - lower resistance wire temperatures equal longer heater life.

When applying cartridge heaters, special care has to be taken to the bore tolerance of the hole where the heater is inserted. The tighter the bore tolerance, the more efficiently the high internal wire temperatures are conducted away.  Tolerances of several thousandths of an inch can change the life expectancy of a cartridge heater significantly.

Strip and band heaters require tight, full surface area clamping to maximize life and performance, while duct heaters and immersion heaters require circulation to transfer heat away from the element, and keeping resistance wire temperature within reasonable operating limits.
strip heater
Internal view of band & strip heater.

Any situation where the heater is exposed to a stagnant air gap (or stagnant fluids) will most likely result in over temperature of the wire and failure at that point.  With this in mind, anyone applying traditional resistance type, electric heating elements must be very aware of maintaining very intimate contact between the heating element and the item or process being heated.

Whenever applying electric heating elements, the consultation of an applications expert is always recommended. They will be able to consider many other operational factors such as wire watt density, conduction properties, control scheme and overall thermal system dynamics.

Heat Transfer 101 for Industrial and OEM Applications

heat transfer
Heat transfer
shown by
melting ice.
When you need to apply heat in industrial applications, or for OEM part heating, everyone works under the same Laws of Thermodynamics. Whether your using electric heating elements or heating by steam, its imperative to understand the basics of heat and heat transfer.

Heat transfer is the movement of heat from one body or substance to another by radiation, conduction, convection or a combination of these processes. When heating a pan of water over a gas flame for example, all three forms of heat transfer are taking place. Heat from the flame radiates in all directions. Conduction takes place with the transfer of heat from the burner to the metal pan. This heat transfer is also responsible for making the handle hot after a period of time. The water is heated by the process up convection which is a circular movement caused by heated water rising and cold water falling.

The process of heat transfer also occurs when an object cools. If a mug of hot coffee is left standing on a cold kitchen countertop its temperature will gradually decrease as heat is lost. The heat energy dissipates by conduction through the mug to the table top, by convection as the liquid rises cools, and sinks, and by the radiation of heat into the surrounding air.

One way to conserve the heat of a liquid and prevent heat transfer is to place it in a thermos. The use use of a vacuum chamber with silvered surfaces along with low conductive materials can greatly improve the amount of heat or cold that is lost to the surrounding environment.

In between the silver glass walls of a thermos lies a vacuum. In the case of a hot liquid, heat transfer by convection through the vacuum is greatly restricted due to the absence have air molecules necessary to facilitate the transfer of heat. The lack of physical contact between the inside and outside walls of the thermos due to this airless space also greatly inhibits the movement of heat by conduction.

Heat loss by radiation is prevented by the silvered walls reflecting radiant energy back into the thermos. Some conduction of heat through the stopper and glass can be expected, but this too is limited because they are made of materials with very low conductivity. Thus the temperatures of both hot and cold liquids can be maintained by a properly designed thermos that limits the transfer energy through radiation, convection, and conduction.

Heat capacity is the amount of heat required to change the temperature of an object or substance by one degree Celsius. The heat capacity of water varies depending on its phase. As solid ice, the heat capacity of water is .5 calories per gram for every one degree Celsius, which means it takes half a calorie to raise the temperature of one gram of ice one degree Celsius. As a liquid, waters heat capacity is one calorie per gram for every one degree Celsius. So it takes one calorie of heat energy to raise one gram of water one degree Celsius.

The processes a phase change between solid liquid and gas also require a specific amount of heat energy. The amount of energy required to change a liquid into a solid or a solid into a liquid is known as heat of fusion. The amount of heat required to change one gram of ice to water is 80 calories. Similarly, the heat of vaporization is the energy required to transform a liquid into a gas. It requires 540 calories to change one gram of liquid water into a gas. With these values its easy to calculate exactly how many calories of heat energy are required to transform one gram of ice, at absolute zero, to steam.

To warm 1 gram a ice from -273 degrees Celsius, to 0 degrees celsius, would be 273 times .5 gram per calorie, or about 140 calories. The phase change of one gram a ice to liquid water requires 80 calories. Then to heat the water from zero degrees Celsius to 100 degrees Celsius with the heat capacity at one calorie per gram, would require 100 calories. The final phase change of one gram of boiling water to steam would require an additional 540 calories. Adding all of these values together yields 860 calories, the amount of heat energy it takes to transform one gram of ice, at absolute zero, to steam.